Page 1 of 1
Journey/Dash Cam Wiring
Posted: Tue Sep 22, 2020 8:57 pm
by gowron492
With a new car pending, I would like to be prepared.
Does anyone know where we can wire up a dash cam?
I know the obvious is going to be from an ignition based fuse in fuse box, but I was wondering if Vauxhall had a connector somewhere in the roof binnical for easy wiring?
I know they are offering dash cams as an option when you build your car and was just hoping they made it easy for everyone to do with a camera of their choice?
Carl,
Re: Journey/Dash Cam Wiring
Posted: Wed Sep 23, 2020 5:15 am
by paul04
I hard wired my dash cam in, and used one of the fuses behind the glove box,
Its a easy job to do, only tricky bit is working near the glove box, not a lot of room,
I did take some pictures if you need help.
Re: Journey/Dash Cam Wiring
Posted: Fri Sep 25, 2020 4:58 pm
by gowron492
Details of what fuse(s) you connected to would be helpful.
Is the fuse(s) connected to the battery or ignition?
Carl,
Re: Journey/Dash Cam Wiring
Posted: Sat Sep 26, 2020 2:53 pm
by paul04
I wired it to come on with the ignition, I will post a picture later on
Re: Journey/Dash Cam Wiring
Posted: Sun Jan 17, 2021 3:32 pm
by hash67
Hi any idea which fuse to use or other helpful pictures, have it running from the cigarette lighter but want to connect to a perm live. I have the hard wire kit that allows park mode to be used. Cuts off the the power drops.
Thanks
Re: Journey/Dash Cam Wiring
Posted: Sat Feb 27, 2021 3:21 pm
by Delboy_lee
Hi guys
I easily wired my Dash Cam in on Corsa e but can’t find suitable way around the passenger door pillar & under Glove box to the Aux Socket ? Any advise would be appreciated, thanks.
Derek
Re: Journey/Dash Cam Wiring
Posted: Tue Jul 27, 2021 7:15 pm
by mattski
Delboy_lee wrote: ↑Sat Feb 27, 2021 3:21 pm
Hi guys
I easily wired my Dash Cam in on Corsa e but can’t find suitable way around the passenger door pillar & under Glove box to the Aux Socket ? Any advise would be appreciated, thanks.
Derek
do you mind telling me which fuse you used for the wiring? photo would be appreciated
thanks