Hi All
I am new to forum and looking for some info on changing the rear pads on a corsa F 2020 sri turbo premium. I can release the parking brake, with the engine not running but do i need to put into some sort of service mode to complete the job safely ? I have looked online and found something similar on an astra K but cant see anything for the Corsa F ( the astra k solution didn't put it in service mode). Any help would be appreciated and any other useful tips when changing the pads. I have had vauxhalls for years but this one has me flummoxed Thanks in advance Pau
Corsa f rear pad change with EPB
-
- Posts: 6
- Joined: Sat Apr 13, 2024 11:43 am
Thanks for taking the time to reply @Valer
I found this from yourself on the grandland forum
That question has come up before and i could only find it being possible using a scan tool,however i have now found this that may help
Disconnect the battery positive cable from the battery
Disconnect the Electrical Connectors on the Parking Brake Actuators
Remove the two Parking Brake Actuators from the rear calipers##### (are these the actual motor on the back of the caliper and do you mean one each side?)####
Turn both parking brake mechanisms (2) clockwise in order to release the parking brake.
Use a ratchet (1) with a TORX
#############When connecting back up will it through any codes or is that an unknown?############
Im thinking of taking it back and getting one without the EPB:(
Has anyone tried this method and was there any issue with codes
Ive added q's in the hashtags
Thanks to all
I found this from yourself on the grandland forum
That question has come up before and i could only find it being possible using a scan tool,however i have now found this that may help
Disconnect the battery positive cable from the battery
Disconnect the Electrical Connectors on the Parking Brake Actuators
Remove the two Parking Brake Actuators from the rear calipers##### (are these the actual motor on the back of the caliper and do you mean one each side?)####
Turn both parking brake mechanisms (2) clockwise in order to release the parking brake.
Use a ratchet (1) with a TORX
#############When connecting back up will it through any codes or is that an unknown?############
Im thinking of taking it back and getting one without the EPB:(
Has anyone tried this method and was there any issue with codes
Ive added q's in the hashtags
Thanks to all
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 1 Replies
- 5511 Views
-
Last post by paul21paul
-
- 2 Replies
- 382 Views
-
Last post by h2onorth
-
- 0 Replies
- 600 Views
-
Last post by a3113
-
- 3 Replies
- 206 Views
-
Last post by h2onorth
-
- 4 Replies
- 10684 Views
-
Last post by Bigcorsafan